Your garage door should run as smoothly as possible all the time. At least, that’s the ideal situation. After all, it’s one of the busiest and most used parts of your home, especially if you and your family go out and use your vehicles a lot.

Basically, you can’t afford for it to fail or get broken for an extended period of time. It can cause a lot of hassle, and also be time-consuming and quite costly. The trick is to know the small signs that might lead to bigger problems down the line. So if you can, you’ll need to troubleshoot it on your own.

grayson county garage door repair

How do you do it, though? Learning some tips from grayson county garage door on how to troubleshoot common garage door problems is a good start.

Check If The Opener is Plugged In

Check if the garage door’s opener is plugged in. This might seem like such a simple matter and it should be a part of the entire routine of making sure that the garage door is operational. However, it’s still important to check it out because the power cord can get loose at times and that can cause the door to stop working.

Check Out The Circuit Breaker

In connection with checking if the opener is plugged in is checking out the circuit breaker. Their connection is inevitable because the circuit breaker is what provides power to the garage door opener.

Keep in mind that even the smallest electrical surge can cause the circuit breaker to trip. Check the breaker panel to see if the breaker for your garage is not in the On position. If that’s the case, then flip the switch to the Off before flipping it to the On position once again. This will reset the breaker before it’s opened once more.

Try Resetting the Remote

You can also try resetting the remote. Do this when the door opens when you press the button on the control keypad that’s mounted on the wall, but not when you use the remote. 

To do it, you’ll require your owner’s manual since the procedure for this will likely vary from one manufacturer to the next. Still, this is an easy enough process that should result in getting the problem fixed.

Someone Might Have Locked the Door

Now someone might have locked the garage door. This might seem simple enough but it definitely happens. So you’ll need to consider looking into it as well and check if someone has locked the garage door from the inside by any chance. Checking it won’t take too long anyway so it’s definitely well worth doing it.

Make Sure the Photo Eye is Clean

The photo eye is for tracking objects that are in the path of the garage door. It’s situated four to eight inches above the floor within the garage door track. Once the photo eye senses something, it will signal the garage door to stop from closing. 

The photo eye is great as a safety feature as it can potentially save children and pets. However, if the photo eye is dirty it’s not going to lrt the garage door move in either direction. So better to always keep it clean by using a small, soft rag.

There you have it, some of the best tips on how to troubleshoot common garage door problems. It’s simple enough that you can do it all by yourself!