Local Businesses Blog in Texas

Cleveland Texas

Category: Garage Door

Garage Door Opener Repair

Garage doors are an integral part of home furnishings, however frequently, they are not maintained whenever a renovation to the home is made. That’s why lots of homeowners suffer from issues like stuck or jammed doors, door opening issues, or garage doors that aren’t opening.

If you’re experiencing issues that your doors are jammed and stuck are usually due to the frame that is deformed or channels in which the door slides on, and they can be repaired without difficulty. In the majority of cases, using an all-purpose tool kit comprised of a hammer and a couple of wrenches, a few bolts, nuts, and a screwdriver, you are able to fix most of these problems by yourself. The intermittent opening and closing of the door might be due to a depressed key in the opener control or it could be due to an issue with the garage door opener’s circuit, which can be fixed easily. The issue can arise when a key part that is part of the garage door has been damaged by an issue, for instance, the gears which drive the door opener. In these situations, it’s necessary to carry out a more complicated repair. The following steps can offer some advice on how to repair and replace the gears that are wearing out of your garage door opener.

It is straightforward to identify what the damage to the motor is if you’ve got a garage door in Colleyville TX that isn’t working even if the motor is functioning properly and the springs that support it are in good working order. The gears, generally made of plastic, are among the most fragile components that make up the door opener. They are susceptible to damage because of a range of reasons, including aging usage, a lack of maintenance, or a problem with the garage door. This might be due to manufacturing faults.

But, with the right equipment and following instructions properly, you can change these gears on your own.

First, disconnect the electrical connections to the garage to ensure there’s no danger of electrocution. Additionally, ensure that no one is allowed to operate the door when you are doing the work. Close the door manually and then take it off the pulley to ensure that it doesn’t cause any harm to your body when you do the work. It is now time to start the process of fixing Garage door openers, and fixing the motors.

It is the next thing to do: take off the cap from the retainer of the pulley belt, and then take it away from the sprocket. It is now possible to remove the chain or belt out of the sprocket. Note its position and apply tape to keep it from getting bent and filthy. Take off the covers at the ends and the drive gear, its retainer clip, as well as the RPM sensor. remove the motor. The nuts hold the motor and shaft. The nuts must be removed first. Once you’ve removed the motor off of the shaft, you’ll be able to remove the gear from it and then replace it’s required. After you’ve replaced the gear, you can start assembling the entire system in the exact opposite manner. Be sure to check to make sure that each piece is put correctly to avoid any issues with opening the door to your garage. Thus, replacing the worn-out gears is more complicated. If you’re not sure about fixing it yourself, you need to get in touch with Colleyville Best Garage Door an experienced garage door repair service to fix the issue. We are your partner to quality garage door services. You could google search us by typing Garage Door company Near Me or visit our website at https://www.colleyvilletx-garagedoor.com/.

Steps to Insulate Your Garage Door

Insulating your garage door might not seem like a necessary task at all. In fact, to some, it might seem like a bit of a waste of time. But it would be a mistake to regard it as something that’s not needed as it can present you with some benefits.

grand prairie tx garage door repair

You can’t argue with the fact that there are several benefits to insulating your garage door. First off, insulating your garage door will make it more energy-efficient and eventually help reduce your energy bills. 

Another benefit is that it will strengthen your grand prairie tx garage door. It will be much stronger and more durable than it was before being insulated. It would be more resistant to damage, whether it’s from extreme weather or other causes. This makes it all the more important for you to know the proper steps to insulate your garage door.

What You’ll Need to Insulate Your Garage Door

To insulate your garage door properly, you’ll need the following materials:

  • Tape measure
  • Utility knife or box cutter
  • Safety goggles
  • Pen, pencil, or markers
  • Work gloves
  • Composite fasteners
  • Insulation
  • Garage door seal – optional

Steps to Follow to Insulate Your Garage Door

The following are the steps that need to be followed in order to insulate your garage door the right way:

  • Make measurements. You need to measure so you can find the areas that are about 12 inches from each side. Mark those areas while making sure that they are properly centered.
  • Cover the markings that you made. Use double-sided tape to cover all of the areas that you marked.
  • Attach the retainer clips to the areas that you’ve covered with the tape.
  • The next step is to measure the panels. Make sure that you’re able to measure each individual panel. Even though they will look like they are of the same size, they are probably not.
  • Cut the insulation. Make sure that you cut the insulation for each panel. Each of the pieces needs to measure about 1 to 2 inches longer than each of the panels. You have to be sure that you’re wearing protective equipment such as gloves and goggles when you’re doing this part since insulation materials are usually irritating to the skin.
  • Now you’ll have to tuck the insulation into each panel. Make sure that the shiny side is the one that’s facing forward. The covering should always be the part that’s visible.
  • Fasten the clips. The retention clips are hidden underneath the insulation by now. You need to feel for them and make small incisions where they are and fasten them using the front side.
  • Install a garage door seal. This would be the last of the steps to insulate your garage door properly. They’re used so that water wouldn’t leak beneath the door, reinforce the insulation, and also help keep pests out. Use adhesive and/or caulk to ensure that they’re secured to the ground.

How to Troubleshoot Common Garage Door Problems

Your garage door should run as smoothly as possible all the time. At least, that’s the ideal situation. After all, it’s one of the busiest and most used parts of your home, especially if you and your family go out and use your vehicles a lot.

Basically, you can’t afford for it to fail or get broken for an extended period of time. It can cause a lot of hassle, and also be time-consuming and quite costly. The trick is to know the small signs that might lead to bigger problems down the line. So if you can, you’ll need to troubleshoot it on your own.

grayson county garage door repair

How do you do it, though? Learning some tips from grayson county garage door on how to troubleshoot common garage door problems is a good start.

Check If The Opener is Plugged In

Check if the garage door’s opener is plugged in. This might seem like such a simple matter and it should be a part of the entire routine of making sure that the garage door is operational. However, it’s still important to check it out because the power cord can get loose at times and that can cause the door to stop working.

Check Out The Circuit Breaker

In connection with checking if the opener is plugged in is checking out the circuit breaker. Their connection is inevitable because the circuit breaker is what provides power to the garage door opener.

Keep in mind that even the smallest electrical surge can cause the circuit breaker to trip. Check the breaker panel to see if the breaker for your garage is not in the On position. If that’s the case, then flip the switch to the Off before flipping it to the On position once again. This will reset the breaker before it’s opened once more.

Try Resetting the Remote

You can also try resetting the remote. Do this when the door opens when you press the button on the control keypad that’s mounted on the wall, but not when you use the remote. 

To do it, you’ll require your owner’s manual since the procedure for this will likely vary from one manufacturer to the next. Still, this is an easy enough process that should result in getting the problem fixed.

Someone Might Have Locked the Door

Now someone might have locked the garage door. This might seem simple enough but it definitely happens. So you’ll need to consider looking into it as well and check if someone has locked the garage door from the inside by any chance. Checking it won’t take too long anyway so it’s definitely well worth doing it.

Make Sure the Photo Eye is Clean

The photo eye is for tracking objects that are in the path of the garage door. It’s situated four to eight inches above the floor within the garage door track. Once the photo eye senses something, it will signal the garage door to stop from closing. 

The photo eye is great as a safety feature as it can potentially save children and pets. However, if the photo eye is dirty it’s not going to lrt the garage door move in either direction. So better to always keep it clean by using a small, soft rag.

There you have it, some of the best tips on how to troubleshoot common garage door problems. It’s simple enough that you can do it all by yourself!

The Best Features to Look for In Your New Garage Door

Admit it or not, your garage door plays an integral part in your daily life. You and your family use it so much, to the point that you almost take it for granted. That’s how much its use has become integrated in your activities – and whether you’re coming or going from home.

garland tx garage door
Garland TX Garage Door

Such an increased prominence means you need to be more careful when choosing your next garage door. You don’t just want it to be as durable and as tough as can be, but you also want it to have other features that could make using it easier than ever before.

It’s understandable then to look for garland garage door repair that have the best features on them. But just what are those features that you need to keep an eye out for?

Here then are the best features to look for in your new garage door:


Convenience is perhaps the number one feature that you’re going to have to look for in your new garage door. It makes perfect sense to look for it first. After all, since you’re going to use your garage door so much during the day, it needs to be convenient to use. You don’t need to go through the trouble of simply opening or closing your garage door easily just because it isn’t convenient to use. For example, a standard sectional garage door will roll up and down with more convenience than other door types.


Insulation is also a very important feature of a garage door and one of the things that you should look at. This has become more important as more and more homeowners use the garage door as their main entrance. It has taken the place of the front door somewhat, at least for a lot of people. And that’s why insulation has become a necessity, especially if people are going to stay in the garage for extended periods of time. You might use it as a home gym or a workshop and having insulation will only make it more comfortable and also practical for you to use.


Ideally, your garage door should be low maintenance. Who wouldn’t that feature in their garage door, right? Because let’s be honest, a garage door made from natural wood might look great, but it’s a very high-maintenance material. If you don’t want to spend too much time or expense on that then you better look for a low maintenance alternative. If you still want the look of real wood, there are now options that let you have that even though it’s made of different material that is easier to maintain.


Customization is one of the best features that a garage door can have and that you must look for. If you’re able to customize it, then you’re likely to end up with the perfect garage door for you and your family. And it’s quite easy to get it since most garage door manufacturers offer customization to their customers. You can control how your garage door will look and operate from the very first part of the process and on to its completion.

Guide on Why You Need Garage Door Repair Services Now

Garage doors are among the hardest and most complicated pieces of hardware in your home. They are exposed to use and abuse on a daily basis. You use your garage door from the morning when you leave for work until the evening when you go home. And in between, it’s also castoff a lot by the rest of your family.

garage door repair rowlett tx

Such a high level of usage will finally lead to wear and tear and damage. It’s unavoidable and when it does happen to your garage door, you better be ready for it. You need to know what to do. Not in a DIY sense ever since that might not bode well for your garage door for the reason of its complexity.

This highlights the significance of garage door maintenance. But in case you haven’t been able to emphasis on that, you’ll have to turn directly to garage door repair. Just make it sure that you’re able to select and work with the best garage door repair company in your area.

Below we’ll take a look at the details why you need rowlett garage door repair services now.

Professionals are the Most Qualified

Garage door experts have the right combination of skills, knowledge, experience, and tools to do the job. And they’ll be able to do your garage door repair correctly and proficiently.

You might be inclined to do the job yourself even though you’re not fit to do so. But that’s not a good idea at all since your lack of skills and knowledge might only make matters worse. So it’s better to trust experts who have been trained and have already repaired countless garage doors before.

Reduce the Risk of Injuries

Decrease the risk of injuries by assigning the job to people who were truly trained to fix your garage door issues. As we said above, garage door repair is a little complex and the fact that garage doors are physically heavy and imposing doesn’t help.

When you employ a contractor, they’ll send over a team of knowledgeable technicians that will do all of the heavy lifting for you. In fact, you wouldn’t have to do a thing and simply wait as they fix whatever your door might have.


The convenience afforded by getting proficient garage door repair services is second to none. They’ll take care of everything. All you have to do is to contact them and approve on the terms and they’d take care of the rest.

All you have to do is sit back and wait until the job is finished. And once they’re done, you and your family can once again start using your garage door for all kinds of purposes.


There is this common misapprehension about going DIY. And that’s the belief that it would help you save money. But if you have the right information and equipment and don’t have a clear idea of what you’re doing, then you’re bound to make errors.

It’s likely to be costly mistakes on your part. So in the end, you end up costing even more than what you planned to or thought you’d spend at the start. Getting a garage door repair company would end up aiding you save a lot of money and a lot of headaches as well.

Powered by WordPress & Theme by Anders Norén