A broken Garage Door Repair Mansfield TX can be a frustrating and potentially dangerous problem to deal with. The spring plays a crucial role in supporting the weight of the door, and when it breaks, it can make it difficult or even impossible to open the door using the automatic opener.

In such situations, you’ll need to manually open the garage door to gain access to your garage. This guide will walk you through the steps to safely and effectively open a garage door with a broken spring.

: Safety First

Before attempting to open a garage door with a broken spring, it’s essential to prioritize safety. The door may be heavy and challenging to control, so wear appropriate safety gear, including gloves and safety glasses, to protect yourself from potential accidents. Keep children and pets away from the area.

: Disconnect the Automatic Opener

Start by disconnecting the automatic opener from the garage door. This can typically be done by pulling the red emergency release cord hanging from the opener rail. By doing this, you’ll ensure that the opener doesn’t attempt to move the door when you manually lift it.

: Assess the Damage

Take a moment to inspect the broken spring and its condition. Identify whether it’s a torsion spring or an extension spring. Torsion springs are usually located above the door, while extension springs are on the sides. Knowing the type of spring can help you determine the best approach for manually opening the door.

: Gather the Necessary Tools

You’ll need a few tools to manually open the garage door safely:

  • A pair of vice grips or locking pliers
  • A sturdy ladder
  • A friend or family member to assist you (recommended)

: Use Vice Grips on Torsion Springs

For garage doors with torsion springs:

  1. Climb the ladder to reach the torsion spring.
  2. Clamp a pair of vice grips onto the shaft of the torsion spring. This will help you control the tension.
  3. Slowly and carefully lift the door using the vice grips to support it.
  4. Have your assistant help you lift the door evenly on both sides until it’s fully open.

: Use the Emergency Release on Extension Springs

For garage doors with extension springs:

  1. Open the garage door as far as it will go using the automatic opener (if possible).
  2. Place a ladder under the track on one side of the door.
  3. Locate the extension spring and disconnect it from the track by removing the safety cable or other attachment.
  4. Repeat this process on the other side.
  5. With the springs disconnected, you and your assistant can manually lift the door until it’s fully open.

: Secure the Door

Once the door is open, it’s crucial to secure it in place to prevent accidents. You can use cinder blocks, wooden blocks, or any other sturdy object to hold the door up securely.

Conclusion:

Manually opening a Garage Door Repair Mansfield TX with a broken spring requires careful planning and execution. Prioritize safety, use the appropriate tools, and seek assistance if needed. If you’re unsure about the process or if the door is too heavy to handle safely, it’s best to consult a professional garage door technician to repair the spring and ensure the safe operation of your garage door. Remember that working with garage doors can be dangerous, so always exercise caution and take necessary precautions.

Mansfield Overhead & Garage Doors

2151 N Holland Rd, Mansfield, TX 76063, United States

1-817-769-2447