Measuring a Garage Door Repair Lawrenceville GA accurately is crucial when it comes to purchasing a new door or making any necessary repairs or replacements.

Here’s a detailed guide on how to measure a garage door properly, broken down into several steps.

Step 1: Gather the necessary tools Before you begin measuring, ensure that you have the following tools at hand:

  • Tape measure: A retractable tape measure with both metric and imperial units is recommended.
  • Step ladder: Use a sturdy step ladder if the garage door is out of reach.
  • Pen and paper: Keep these handy to record your measurements.

Step 2: Measure the width Start by measuring the width of the garage door opening. Follow these steps:

  1. Position yourself inside the garage, facing the opening.
  2. Locate the left side of the opening and measure from the inside of the left jamb to the inside of the right jamb.
  3. Take the measurement at three different heights: the bottom, middle, and top of the opening.
  4. Note down the smallest measurement of the three. This ensures that the door will fit properly.

Step 3: Measure the height Next, measure the height of the garage door opening. Follow these steps:

  1. Stand inside the garage, facing the opening.
  2. Measure from the floor to the top of the opening, near the center.
  3. Take the measurement at two different locations: the left and right sides.
  4. Note down the smallest measurement of the two.

Step 4: Measure the headroom The headroom is the space between the top of the door opening and the ceiling. This measurement is essential to determine the type of garage door opener that can be installed. Follow these steps:

  1. Position yourself inside the garage, facing the opening.
  2. Measure from the top of the opening to the nearest obstruction (e.g., ceiling or any hanging objects).
  3. Ensure that you measure at multiple points along the width of the opening, as the headroom might vary.
  4. Note down the smallest measurement.

Step 5: Measure the sideroom The sideroom is the space on each side of the garage door opening, between the opening and the nearest wall or obstruction. This measurement determines the width available for the door tracks. Follow these steps:

  1. Measure the distance from the side of the opening to the nearest wall or obstruction.
  2. Repeat the measurement on the other side.
  3. Note down the measurement for each side.

Step 6: Determine the track length The track length is the distance from the edge of the door opening to the end of the horizontal track. It helps determine the type and size of the garage door needed. Follow these steps:

  1. Measure from the edge of the door opening to the end of the horizontal track.
  2. Repeat the measurement on the other side.
  3. Note down the measurement for each side.

Step 7: Additional measurements In some cases, you may need to measure additional elements, such as the backroom (the depth of the garage from the opening to the back wall) or the angle of the ceiling. These measurements can be helpful if you’re considering a specific type of garage door or opener.

Step 8: Verify your measurements After completing all the measurements, it’s important to verify their accuracy. Take a second look at each measurement you recorded and compare them to ensure consistency. Inaccurate measurements can lead to ill-fitting doors or other complications.

By following these steps carefully, you can measure your Garage Door Repair Lawrenceville GA accurately. Remember to double-check your measurements and consult with professionals or manufacturers if you have any doubts. Proper measurements will ensure a well-fitting garage door and a smooth installation or replacement process.

Southern Home Garage Door Lawrenceville

2522 Cruse Rd NW, Lawrenceville, GA 30044, United States

1-770-758-2324