When it comes to measuring a garage door torsion spring, I always make sure to take the necessary safety precautions before starting the process. This includes wearing proper protective gear, such as gloves and safety glasses, and making sure the door is in the down position.
In reference to Garage Door Repair Woodland Hills CA, once I’m ready to measure the torsion spring, I gather my tools, which typically include a tape measure and winding bars. It’s important to make sure the winding bars are the correct size for the spring being measured.
Next, I locate the torsion spring above the garage door, which is mounted on a metal tube. I take note of the end of the spring to determine the wind of the spring, which can either be left-hand wound or right-hand wound.
Using the tape measure, I measure the inside diameter of the spring by measuring the distance across the center of the spring from one inside edge to the opposite inside edge. I also count the number of coils on the spring and measure the wire size, which is the thickness of the wire used to make the spring.
To determine the length of the spring, I use the winding bars to unwind the spring until it is completely relaxed. I then measure the length of the spring from end to end, including the loops.
Finally, I calculate the torque of the spring using the formula Torque = (Wire Size)^2 x Number of Coils x Spring Length x 1.6. This calculation is important to determine the correct replacement spring needed for the garage door.
To sum it up, as stated in Garage Door Repair Woodland Hills CA, it’s crucial to remember that working with garage door torsion springs can be extremely dangerous and should only be attempted by those who are experienced with garage door repairs. Mishandling the spring can cause serious injury or damage to the garage door. If you’re unsure about measuring a garage door torsion spring, it’s best to call a professional to handle the task for you.
Warner Center Garage Doors
Woodland Hills, CA 91365
818-514-7622