Lubricating your Mckinney Overhead & Garage Doors tracks is an important maintenance task that can help ensure smooth and quiet operation of your garage door. Over time, dirt, debris, and friction can cause the tracks to become less efficient. Lubricating them can extend their lifespan and improve the overall performance of your garage door system.
Here’s a step-by-step guide on how to properly oil your garage door tracks:
Tools and Materials You Will Need:
- Lubricant spray (silicone-based or lithium-based)
- Clean cloth or rag
- Ladder (if needed)
- Safety glasses
- Gloves
Important Safety Precautions:
- Always wear safety glasses and gloves to protect yourself from debris and potential contact with lubricant.
- Ensure the garage door is fully closed and the opener is disconnected from power before starting.
1. Choose the Right Lubricant:
- Use a silicone-based or lithium-based lubricant specifically designed for garage door tracks. These lubricants are non-corrosive and can withstand temperature changes.
2. Prepare the Area:
- Clear the area around the garage door tracks of any debris, cobwebs, or dirt. This will ensure that the lubricant is applied directly to the tracks and rollers.
3. Close the Garage Door:
- Make sure the garage door is fully closed before you begin lubricating the tracks.
4. Clean the Tracks:
4.1. Check for Debris:
- Inspect the tracks for any dirt, debris, or built-up grime. If you notice any, gently remove it using a clean cloth or rag.
4.2. Use a Degreaser (If Needed):
- If the tracks are particularly dirty or have grease build-up, you can use a mild degreaser to clean them. Apply the degreaser to a cloth and wipe down the tracks, then wipe off any excess with a clean cloth.
5. Apply the Lubricant:
5.1. Shake the Lubricant:
- Shake the lubricant spray well before using it. This ensures that the lubricating components are evenly mixed.
5.2. Lubricate the Rollers:
- Position yourself near one side of the garage door.
- Spray a small amount of lubricant directly onto the rollers that run along the track. Apply the lubricant where the roller meets the track.
5.3. Lubricate the Tracks:
- Apply a thin, even coat of lubricant along the length of the track. Start at one end and work your way to the other.
- Be careful not to overspray, as excess lubricant can attract dirt and debris.
5.4. Open and Close the Door:
- Manually open and close the garage door a few times to allow the lubricant to distribute evenly along the tracks and rollers.
6. Wipe Off Excess Lubricant:
- After applying the lubricant, use a clean cloth or rag to wipe off any excess. This helps prevent dirt and debris from sticking to the lubricant.
7. Reconnect the Opener:
- Once you’re satisfied with the lubrication, reconnect the garage door opener to power and test the door’s operation.
8. Periodic Maintenance:
- Garage door tracks should be lubricated approximately every six months or as needed. If you notice any signs of squeaking, grinding, or difficulty in the door’s movement, it’s a good indicator that it’s time to lubricate the tracks again.
9. Benefits of Regular Lubrication:
- Regularly lubricating your garage door tracks offers several benefits:
- Reduced friction and wear on rollers and tracks.
- Quieter and smoother door operation.
- Extended lifespan of the garage door system.
- Prevention of rust and corrosion.
10. Conclusion:
Lubricating your Mckinney Overhead & Garage Doors tracks is a relatively simple yet essential maintenance task that can have a positive impact on the performance and longevity of your garage door system. By following these steps and using the right lubricant, you can ensure that your garage door operates smoothly and quietly for years to come. Remember to prioritize safety, and always wear safety glasses and gloves while working on garage door maintenance tasks.
Mckinney Overhead & Garage Doors
3804 Landsdowne Dr, McKinney, TX 75072, United States3804 Landsdowne Dr, McKinney, TX 75072, United States
1-972-848-7414