Replacing a garage door cable can seem like a daunting task, but with the right tools and some basic knowledge, it can be done easily and safely.

Here is a step-by-step guide from Garage Door Repair Oxnard CA on how to replace a garage door cable.

Step 1: Gather the necessary tools and materials To replace a garage door cable, you will need the following tools and materials:

  • Replacement cable
  • Winding bars
  • Pliers
  • Wrench
  • Screwdriver
  • Vice grips
  • Safety glasses
  • Work gloves
  • Ladder

Step 2: Disconnect the garage door opener Before you start working on the garage door cable, you need to disconnect the opener. This is to prevent the door from accidentally opening or closing while you are working on it. Pull the emergency release handle to disconnect the opener from the door.

Step 3: Release the tension on the spring The next step is to release the tension on the garage door spring. Use the winding bars to loosen the tension on the spring by inserting them into the winding cone and turning them in the opposite direction of the wind. Use vice grips to hold the winding bars in place.

Step 4: Remove the old cable After releasing the tension on the spring, remove the old cable from the garage door. Use pliers to remove the cable from the drum at the top of the door and the bottom bracket at the bottom of the door.

Step 5: Install the new cable Install the new cable by inserting it into the bottom bracket and then onto the drum at the top of the door. Make sure the cable is properly aligned and secured in place.

Step 6: Wind the spring After installing the new cable, wind the spring using the winding bars. Turn the bars in the direction of the wind until the spring is properly tensioned.

Step 7: Test the garage door Once you have wound the spring, test the garage door to ensure it is working properly. Reconnect the garage door opener and test the door by opening and closing it several times.

Step 8: Adjust the tension If the garage door is not opening or closing smoothly, you may need to adjust the tension on the spring. Use the winding bars to adjust the tension until the door operates smoothly.

Step 9: Safety precautions Always wear safety glasses and work gloves when working on a garage door. Be sure to use a ladder when working on the garage door and do not attempt to replace the cable on your own if you are not comfortable with the process.

Overall, as stated in Garage Door Repair Oxnard CA, replacing a garage door cable is not a difficult task, but it does require some basic knowledge and the right tools. By following these steps, you can replace a garage door cable safely and easily.

OXR Overhead Garage Doors

1301 Seabridge Ln #3, Oxnard, CA 93035, United States

805-800-8965