As the owner of a garage, I often need to perform maintenance tasks to keep my garage door functioning properly.
One of the most important tasks is lubricating the door. Here’s how I do it based on North Arlington Garage Door Repair:
First, I gather all the tools and materials I need. I typically use a silicone-based lubricant spray, a clean rag, and a stepladder. Then, I close the garage door completely and unplug the garage door opener to prevent it from accidentally activating while I’m working.
Next, I use the stepladder to access the rollers on the top section of the garage door. I apply a small amount of lubricant to the rollers, being careful to avoid getting any lubricant on the track or the garage door itself. This step is important because the rollers can become dry and squeaky over time, which can cause unnecessary wear and tear on the door and opener.
After lubricating the rollers, I move on to the hinges. I apply a small amount of lubricant to each hinge, being sure to lubricate the pivot points where the hinge connects to the garage door and to the track. This step is important because the hinges can also become dry and squeaky over time, which can cause unnecessary wear and tear on the door and opener.
Next, I check the springs and apply a small amount of lubricant to each spring. The springs are under tension and can be dangerous, so I take extra care when working with them. This step is important because the springs can become dry and squeaky over time, which can cause unnecessary wear and tear on the door and opener.
Moving on, I move down to the bottom section of the garage door and apply a small amount of lubricant to the bottom brackets. This step is important because the brackets can become dry and squeaky over time, which can cause unnecessary wear and tear on the door and opener.
Once I’ve applied lubricant to all the necessary components, I use the clean rag to wipe away any excess lubricant. I’m careful not to get any lubricant on the garage door itself, as this can cause damage to the paint or finish.
Finally, I plug the garage door opener back in and test the garage door to ensure that it operates smoothly and quietly. This step is important because it allows me to confirm that the lubricant has been applied correctly and that the garage door is functioning properly.
Overall, lubricating a garage door is a simple but important task that should be performed regularly, typically every six months. By following these steps from North Arlington Garage Door Repair, I can keep my garage door functioning smoothly and prevent any unnecessary damage or wear and tear.
Garage Door Experts of North Arlington
711 Trinity Cir, Arlington, TX 76006, United States
817-383-2114