Replacing a garage door spring can be a dangerous task, and it’s important to take the necessary safety precautions. It’s recommended to hire a professional to replace garage door springs, but if you feel confident in your abilities and have the proper tools, here are the steps to replace a garage door spring.
Replacing a garage door spring is a task that can be quite challenging and dangerous, but I’ll do my best to walk you through the process based on my own experience. Before we begin, it’s important to note that it’s highly recommended to hire a professional to replace garage door springs for safety reasons.
However, if you feel confident in your abilities and have the necessary tools, here’s how to replace a garage door spring from Garage Door Repair South Arlington TX.
First, I gather all the necessary tools and materials to ensure that I have everything I need before starting the replacement process. The tools I typically need include safety glasses, leather work gloves, winding bars, a socket wrench set, and a tape measure. I also make sure to have the replacement springs that are the correct type and size for my garage door.
Next, I identify the type of spring I need to replace. There are two types of garage door springs – torsion springs and extension springs. I make sure to determine which type of spring my garage door has before proceeding with the replacement.
Once I’ve identified the type of spring, I release the tension on the old spring. If I’m replacing a torsion spring, I insert the winding bars into the winding cone of the spring and unwind it until I’ve released the tension on the cables. If I’m replacing an extension spring, I disconnect the safety cables from the brackets and release the tension on the spring by pulling it towards the door and removing the S-hook.
After releasing the tension on the old spring, I remove it from the garage door. For torsion springs, I loosen the set screws on the stationary cone and slide the spring off the shaft. For extension springs, I simply unhook the spring from the door and the brackets.
I then install the new spring by sliding it onto the shaft for torsion springs and attaching it to the brackets for extension springs. It’s important to ensure that the spring is properly aligned and the set screws are tightened.
Next, I wind the new spring to the appropriate tension using the winding bars. I wind the spring evenly and avoid over-tightening it.
After winding the new spring, I reattach the safety cables and test the garage door to make sure it opens and closes smoothly. If my garage door has two springs, I repeat the replacement process for the other spring.
In conclusion, refer to Garage Door Repair South Arlington TX, replacing a garage door spring can be a dangerous task, and it’s essential to take the necessary safety precautions and follow the specific instructions for your garage door and spring type. If you’re not confident in your abilities, it’s best to hire a professional to replace your garage door spring.
South Arlington Overhead & Garage Door
3330 Matlock Rd #204, Arlington, TX 76015, United States
817-383-2173