Electric Garage Door Repair Argyle TX offer convenience and security to homeowners, allowing them to open and close the door with the push of a button.

However, there may be situations when you need to close the garage door manually, such as a power outage or a malfunctioning opener. In this comprehensive guide, we will walk you through the process of manually closing an electric garage door step by step, ensuring your safety and the proper operation of your door.

1. Ensure Safety

Before you start, it’s crucial to prioritize safety. Here are some precautions to take:

  • Disconnect the power: To prevent any accidental activation of the electric opener, unplug it from the power source or turn off the circuit breaker that supplies power to the garage door opener.
  • Clear the area: Make sure there are no obstructions in the path of the garage door. Ensure that people, pets, and objects are safely away from the closing door.
  • Use caution: Manually closing a garage door can be physically demanding, especially if it’s a heavy door. If you’re unsure about your ability to do it safely, consider asking for assistance.

2. Locate the Emergency Release Cord

Most garage door openers come with an emergency release cord. This cord is typically red and hangs from the opener’s trolley. Its purpose is to disconnect the opener from the door so that you can manually operate the door.

3. Pull the Emergency Release Cord

Gently pull down on the emergency release cord. This action will disengage the opener from the garage door, allowing you to operate the door manually. You will feel some resistance as you pull the cord.

4. Lift the Garage Door

With the emergency release cord disengaged, you can now lift the garage door manually. Place your hands on the bottom of the door on both sides and lift it slowly and steadily. Depending on the type and weight of your garage door, you may need assistance.

5. Close the Garage Door Carefully

As you lower the garage door, ensure that it descends evenly and smoothly. Do not let go of the door abruptly, as this could cause damage or pose a safety risk. Keep a firm grip on the door until it is fully closed.

6. Re-engage the Garage Door Opener

Once the door is closed, you will need to re-engage the garage door opener to its normal operating mode. To do this:

  • Pull the emergency release cord down again to its original position.
  • The trolley on the opener should re-engage with the door. You may need to push the door slightly to help the trolley connect.

7. Test the Door

After re-engaging the opener, it’s essential to test the door’s operation. Use the garage door opener remote or wall button to open and close the door. Make sure it operates smoothly and without any issues.

8. Reconnect the Power

If the power was disconnected earlier, plug the garage door opener back into the power source or turn the circuit breaker back on.

9. Schedule Repairs

Manually closing your garage door should be a temporary solution. If you needed to do this due to a malfunctioning opener or any other issue, it’s crucial to schedule repairs with a qualified technician. Operating your garage door manually for an extended period can cause additional damage.

Conclusion:

Knowing how to manually close an electric Garage Door Repair Argyle TX is a valuable skill for any homeowner. By following the steps outlined in this guide and prioritizing safety, you can ensure that your garage door can be operated even in situations where the electric opener is not functional. Remember that manual operation should be a temporary measure, and any issues with your garage door opener should be addressed by a professional technician promptly.

Argyle Gates & Garage Doors

940-400-3769