Garage Door Repair Grand Prairie TX Garage door springs are under high tension and can cause serious injury if mishandled.

It’s essential to follow proper safety procedures and use the correct tools and techniques when replacing a broken spring. Here’s a comprehensive guide on how to replace a broken spring on a garage door:

1. Identify the Type of Spring:

Garage doors typically use one of two types of springs: torsion springs or extension springs. Determine which type of spring your garage door has before proceeding with the replacement.

2. Gather the Necessary Tools and Materials:

Before starting the replacement process, gather the following tools and materials:

  • Replacement garage door spring(s) (make sure they are compatible with your garage door)
  • Vice grips or locking pliers
  • Winding bars or winding rods
  • Adjustable wrench or socket set
  • C-clamps or locking pliers (for securing the door)
  • Ladder or step stool
  • Safety glasses
  • Work gloves

3. Disconnect the Garage Door Opener:

To prevent accidental activation of the garage door opener during the spring replacement process, disconnect power to the opener by unplugging it from the electrical outlet or turning off the circuit breaker that supplies power to the opener.

4. Secure the Garage Door:

Use C-clamps or locking pliers to secure the garage door in the closed position to prevent it from accidentally opening while you’re working on the springs. Clamp the pliers or C-clamps securely to the garage door tracks on both sides of the door.

5. Release Tension from the Broken Spring:

If you have a torsion spring system, use winding bars or rods to unwind and release tension from the broken spring. Insert one winding bar into the winding cone on the spring and slowly turn it counterclockwise to release tension. Repeat this process with the second winding bar until the spring is fully unwound and the tension is released.

6. Remove the Broken Spring:

Once the tension is released from the broken spring, use a wrench or socket set to loosen and remove the set screws or bolts that secure the spring to the torsion tube or spring anchor bracket. Carefully remove the broken spring from the garage door assembly.

7. Install the New Spring:

Install the new garage door spring(s) according to the manufacturer’s instructions and specifications. Make sure the spring is installed with the correct orientation and secured tightly to the torsion tube or spring anchor bracket.

8. Wind the New Spring:

If you have a torsion spring system, use winding bars or rods to wind the new spring and apply tension. Insert one winding bar into the winding cone on the spring and slowly turn it clockwise to wind the spring. Repeat this process with the second winding bar until the spring is fully wound and the correct amount of tension is applied.

9. Test the Garage Door:

After installing the new spring(s), remove the clamps or locking pliers securing the garage door and manually lift the door to ensure it operates smoothly and evenly. Test the garage door opener to verify that it functions properly.

10. Perform Regular Maintenance:

To ensure the continued reliability and safety of your garage door system, perform regular maintenance tasks, including lubricating moving parts, inspecting cables and hardware, and testing the balance and operation of the door.

11. Consider Professional Assistance:

If you’re uncomfortable or inexperienced with garage door repairs, or if your garage door has complex spring systems, consider hiring a professional garage door technician to perform the replacement. Professional technicians have the knowledge, skills, and specialized tools required to safely and effectively replace broken springs.

Garage Door Repair Grand Prairie TX Remember to prioritize safety at all times, use the correct tools and techniques, and seek professional assistance if needed. With proper maintenance and care, your garage door system will continue to operate smoothly and reliably for years to come.

Roadrunner Garage Doors

1-214-427-1335